victorian flooring

Outward Bound Victorian Floor after

Victorian Tiled Floor Restoration at Buxton Outward Bound Centre

Derby University have a 58 acre outward bound centre in Buxton at the centre of the famous peak district. The manor which was previously a hotel is the hub of centre and caters for numerous outdoor pursuits including climbing, underground caving and canoeing; as you can imagine the floors in manor house get a fair amount of wear as students come and go in their boots and rucksacks. All this takes its toll and I was asked to restore a marvelous old Victorian tiled floor at the manor house.

Cleaning the Victorian Tiled Floor

The Victorian tiled floor was looking tired; any sealer that may have been applied previously had long since worn off. There were a few cracked and broken tiles which needed replacing and fortunately you can still source these tiles and so once this was done I set about cleaning the floor. To clean I used Tile Doctor Pro-Clean which is an alkaline product in conjunction with a buffing machine fitted with a black scrubbing pad; once the floor was clean I washed it down with clean water to remove any remaining chemical before sealing. I can recommend the use of a wet vacuum at this point as it makes the job of removing liquids from floors much faster.

Outward-Bound-victorian-Floor-before

Sealing the Victorian Tiled Floor

One the floor was dry I started the sealing process or applying five coats of Tile Doctor Seal and Go, this can take a while as it’s necessary to allow each coat to dry before applying the next. The sealer added a nice sheen to the floor and will provide protection to the Victorian tiles going forward; you can see the difference in the photographs.

Outward-Bound-Victorian-Floor-after

 
 

Tiled Victorian floor restoration in Buxton for Derby University

Victorian Tiled Floor Restoration at Buxton Outward Bound Centre Read More »

Victorian Floor After Cleaning and Sealing

Victorian Tiled Hallway Renovated in Ashton Under Lyne

This Victorian Tiled Entrance Hall was an original feature of a house in Ashton under Lyne which is a town in the wider Greater Manchester area; naturally an entrance hall is a high traffic area and subject to a fair amount of wear so it was in need of a deep clean and re-seal.

Victorian-Floor-Before-Cleaning

Cleaning the Victorian Tiled Floor

The Victorian Tiled tiles were fairly dirty so we mixed Tile Doctor Pro-Clean 50/50 with NanoTech Ultra-Clean and then diluted it with water; the two products together form a very powerful cleaner as you get the cleaning power of Pro-Clean combined with the tiny abrasive particles found in Ultra-Clean. The resulting mixture was worked into the floor using a buffing machine fitted with a black scrubbing pad. Once the floor was clean and I was happy with the results it was rinsed with clean water to remove any trace of cleaner and neutralise the floor prior to sealing. We used a wet vacuum to remove the water from the floor and left the floor to dry overnight.

Sealing Victorian Floor Tiles

The next day the floor was dry so we set about applying the sealer. For Victorian Tiled floors I recommend the use of Tile Doctor Seal and Go, its ideal for Victorian Tiled and as well as providing good stain protection its adds a nice low sheen to the floor. To fully seal this floor we needed four coats of Seal and Go before which does take time as it’s necessary to allow each coat to dry before applying the next.

Victorian-Floor-After-Cleaning-and-Sealing

 
 

Cleaning and Sealing Victorian Tiled Floor Tiles in Greater Manchester

Victorian Tiled Hallway Renovated in Ashton Under Lyne Read More »

Scroll to Top