This Ceramic tiled bath with shower was installed at house in Didsbury, this customer wanted to give the bathroom a facelift and not usually it was the grout rather than the ceramic tile that had discoloured, the silicone also needed to be replaced due to the mould build-up and if you get mould on silicone it’s impossible to remove and can only be replaced. Unfortunately mould build-up in bathrooms is quite common in the UK due to our damp climate and modern insulated homes that restrict air flow. If you’re having this problem yourself consider installing a more powerful extractor fan or simply leaving the door to the bathroom open more often.
Cleaning Tile and Grout
The Ceramic tiles and grout were treated using a strong 2:1 dilution of Tile Doctor Pro-Clean which is a highly recommended Tile and Grout cleaning product; being alkaline it’s safe to use on all sorts of tile and stone surfaces. For vertical tiled surfaces I recommend the mixture is decanted into a bottle with a trigger spray attachment which when sprayed onto the wall allows the cleaner to mix with air making it lighter and allowing it to stick better. The solution was then worked in using a stiff scrubbing brush by hand before being rinsed off with water; this process was repeated a number of times until we had managed to clean all the areas and then left to dry. If you’re doing this work yourself then you should know that Tile Doctor produces a product that comes with a spray attachment called col=”https://www.TileDoctor.co.uk/Oxy-Pro-Shower-Tile-Grout-Cleaner.asp” target=”_blank”>Oxy Pro that is ready to use and can save you some time.
Whilst waiting for the tile and grout to dry the Silicone Sealer was removed using a sharp knife, as I mentioned before once mould gets a grip on silicone it will need to be replaced. It’s also worth mentioning at this point that silicone will last longer if the residue from soaps, shampoos and body washes etc. are rinsed away with clean water after having a shower as it’s the chemical and not the water that damages the silicone in the first place.
Cleaning the grout had made a visible difference and improved the overall look of the bathroom but it wasn’t showroom condition so to improve it further it was necessary to apply a white Grout Colourant. The product we use is epoxy based and forms a thin impermeable barrier over the grout so not only does it look good it protects the grout as well; it’s very easily applied using a small brush along the grout lines and you just wipe of the excess so it wasn’t long before the grout was looking like new.
Last step was to re-new the silicone sealant around the top of the bath and the job was finished; my customer was very pleased with the results and made the comment that she thought it looked like new.