Derby University have a 58 acre outward bound centre in Buxton at the centre of the famous peak district. The manor which was previously a hotel is the hub of centre and caters for numerous outdoor pursuits including climbing, underground caving and canoeing; as you can imagine the floors in manor house get a fair amount of wear as students come and go in their boots and rucksacks. All this takes its toll and I was asked to restore a marvelous old Victorian tiled floor at the manor house.
Cleaning the Victorian Tiled Floor
The Victorian tiled floor was looking tired; any sealer that may have been applied previously had long since worn off. There were a few cracked and broken tiles which needed replacing and fortunately you can still source these tiles and so once this was done I set about cleaning the floor. To clean I used Tile Doctor Pro-Clean which is an alkaline product in conjunction with a buffing machine fitted with a black scrubbing pad; once the floor was clean I washed it down with clean water to remove any remaining chemical before sealing. I can recommend the use of a wet vacuum at this point as it makes the job of removing liquids from floors much faster.
Sealing the Victorian Tiled Floor
One the floor was dry I started the sealing process or applying five coats of Tile Doctor Seal and Go, this can take a while as it’s necessary to allow each coat to dry before applying the next. The sealer added a nice sheen to the floor and will provide protection to the Victorian tiles going forward; you can see the difference in the photographs.