tile sealing Archives - Greater Manchester Tile Doctor

Travertine Tiled Floor Before and After Cleaning Bury

Burnishing and Sealing to Restore Travertine Tiles in Bury

Travertine is a distinct and characterful stone that makes for some truly beautiful tiled floors. However, like any natural stone the main difficulty with Travertine tiles is keeping them looking fantastic and unfortunately without regular maintenance its appearance can decline over time.

This customer, who lives in Bury, contacted me for this exact reason. For the past decade, she had attempted to keep her Travertine floor clean by using some kind of wax polish, only to find that this actually made maintenance more difficult, the wax built up in layers and was difficult to remove.

Travertine Tiled Floor Before Cleaning Bury

I visited the property to conduct a test clean and determine the kind of results I could achieve through restoring the entire floor. The customer was very impressed with the small area I cleaned and booked me in on the same day to complete the full job.

Cleaning a Travertine Tiled Floor

As a result of my successful test clean, I already knew that the best process to restore the tiles was burnishing. This involves the application of different grades of diamond encrusted burnishing pads to strip away dirt and staining, and gradually polish the stone to achieve a quality shine.

Normally on Travertine tiles I would start by applying the Coarse 400 and Medium 800 grit pads, followed by moving up to Fine 1500 and Very Fine. In this particular case, I started by using a Very Coarse 200 grit burnishing pad to strip off the wax coating and old sealers from the tiles. The pad was fitted to a rotary machine and lubricated with a small amount of water.

After finishing with the 200-grit pad, I removed all soiled water with my wet vacuum. There were still few areas of wax left in the corners of the room, and on these areas, I used a 200 grit handheld burnishing block.

When I finished with first round of burnishing, I repeated the exact same process with the 400, 800, and 1500 grit pads, rinsing away the soil in between until I was left with a high quality polished finish right across the floor.

Travertine Tiled Floor During Polishing Bury

After completing the burnishing, I filled a number of small pitted holes in the stone using a beige flexible epoxy-based grout to match the rest of the floor. I then left the floor to dry until the next day.

Sealing a Travertine Tiled Floor

The next day I returned to the property and used a damp tester to make sure the floor was dry enough for sealing. Usually with polished tiles this isn’t a problem, but sometimes the grout can be an issue. Luckily, there weren’t any issues with dampness.

Before sealing I went over the floor again using the Very Fine grit pad with a tiny amount of water as lubricant. Finally, I sealed the floor with our impregnating sealer known as Tile Doctor Colour Grow. The sealer penetrates the stone and enhances the natural colours and patterns in the stone. I polished off any excess sealer with several cotton cloths.

Travertine Tiled Floor After Cleaning Bury

To make sure the floor was in pristine condition I went over the floor for a final time with the Very Fine grit pad to smoothen the surface after sealing.

The customer was extremely pleased with the result, and even promised to recommend me to her daughter to clean and seal her Marble tiled floor. I also left her a free bottle of Tile Doctor Neutral Tile Cleaner to help her ensure the floor stays beautiful, we recommend Neutral Clean for the regular cleaning of sealed floor as most supermarket cleaners are acidic and will reduce the life of your sealer over time.

Restoring the Polish on a Travertine Tiled Floor in Greater Manchester

Burnishing and Sealing to Restore Travertine Tiles in Bury Read More »

Renovating Dull Travertine Tiles in Newton Heath

Cleaning, Polishing and Sealing Travertine Floors in Newton Heath

1 Comment / Ashton-under-Lyne Tile Cleaning, Travertine Tile Cleaning, Work History / TileProf

This customer in Newton Heath, just outside of Manchester, used to have a beautiful polished travertine floor on most of the ground floor and bathroom but over time it was getting duller and duller as the polish became worn down, not helped I might add by their choice of cleaning products which were not appropriate for this type of floor. Additionally, numerous cracks and holes had appeared in their floor and worried it was going to get worse they decided to call in some professional help and get the whole floor fully restored.

Travertine Tiled Floor Before Cleaning and Sealing Newton Heath

When I got the call I went over to the house to take a in-depth look at the problem and recommended that the floor was burnished using diamond pads of different grades. They also asked if I could apply the same treatment to the travertine bathroom floor and shower cubicle as well, which I was very happy to do so we agreed a price and scheduled a date to do the work.

Travertine Kitchen Floor Before Cleaning and Sealing Newton Heath

Dull Travertine Floor Cleaning/Polishing

To start the burnishing process, I applied the Coarse 400 grit burnishing pad to the floor using rotary machine and water as lubrication to break down and remove any old sealer from the stone. When finished with first burnishing pad I removed all the soiled water left on floor with a wet vacuum. This removal process of soiled residue was repeated after each use of a burnishing pad.

Next, I moved on to the Medium 800 grit pad which is less coarse, but still rough enough to break down layers of ingrained dirt. I followed this up with the application of a Fine 1500 grit pad, which started to smooth down the rough areas of the surface to prepare the floor for a final polish with 3000 grit. However before moving straight on to the final of the four pads, I took the time to carefully fill in the all the small cracks and holes in the stone, before leaving the floor to dry until the next day.

Sealing Travertine Floor

The next morning, I returned to the property to finish off the floor restoration. As soon as I arrived I used a damp tester to make sure the floor was completely dry.

All was well so I went over the floor with the final Very Fine 3000 grit burnishing pad, this time without any water lubricant, to finally achieve a high quality polished finish.

For polished floors, we recommend the use an impregnating sealer that penetrates the pores of the stone rather than sitting on the surface of the floor, as this ensures the quality of the polish isn’t damaged. With this in mind I applied Tile Doctor Colour Grow to seal the tiles. This is a colour enhancing sealer that provides durable surface protection and allows the surface to breathe whilst enhancing the natural colours in the stone. At this point it’s important that any sealer that doesn’t penetrate the stone is removed by polishing it off with a cloth.

Travertine Tiled Floor After Cleaning and sealing Newton Heath

After this I went on to repeat the cleaning, polishing and sealing process on their Travertine Tiled shower cubicle but I’ll detail that in a separate post.

Needless to say, the customer was very happy with the work carried out on the floor and shower cubicle and recommended me to his neighbour straight away.

Travertine Bathroom Floor After Cleaning and sealing Newton Heath

Professional Travertine Tile Restoration in Greater Manchester

Cleaning, Polishing and Sealing Travertine Floors in Newton Heath Read More »

Renovating Dull and Dirty Yorkstone Tiles in Hyde

Heavily Soiled Yorkstone Tiled Floor Cleaned & Sealed in Hyde

1 Comment / Denton Tile Cleaning, Work History / TileProf

This customers, who live in the town of Hyde, Greater Manchester, were in the process of replacing their kitchen furniture when they realised just how soiled their fantastic Yorkstone tiled floor had become after years without attention.

Yorkstone Slab Floor Before Cleaning and Sealing in Hyde

If you’re not already familiar with Yorkstone, you may be interested to know it is a variety of Sandstone that is manufactured unsurprisingly in Yorkshire quarries since medieval times. It’s known for its hard wearing and durable qualities, but no stone can be completely immune to dirt and staining built up over years of use.

The customers were struggling for success with their own cleaning methods and supermarket products so they decided instead to see what a Tile Doctor could do to restore the floor. I was happy to oblige and on my first visit demonstrated what was possible by doing a test clean which the customers were very impressed with and booked me in straight away.

Cleaning a Soiled Yorkstone Tiled Floor

As a result of the test clean I knew I could get good results cleaning the floor using Tile Doctor Pro-Clean which is a heavy duty alkaline yet flexible cleaning product that can also can strip sealers from tiles when used in a strong dilution. In this case a strong dilution was exactly what I needed and it was applied liberally across the floor, and left it to dwell and soak into the stone for about ten minutes. I followed this by scrubbing it into the stone with black scrubbing pad fitted to rotary machine, successfully eradicating the thick layers of muck and any remaining sealers in the process.

Yorkstone Slab Floor During Cleaning in Hyde

After scrubbing the entire floor, I extracted all the now soiled cleaning solution using a wet vacuum and then spot treated any areas that looked like they needed more work. On the whole, the cleaning process was a success, however, in one corner I discovered a thick tar stain that had been there for years. As the tar was solid as a rock I decided to apply an even stronger product to shift it. Fortunately, I have a number of products that I can use and in this case I was able to deal with it by applying Tile Doctor Nano Tech HBU, which is our heavy soil build-up remover. After application, it was left it to dwell for half an hour and then with the aid of a steamer and black scrubbing pad to soften the build-up even more I managed to remote it entirely.

Once I was happy with the condition of the flagstones and grout I gave the floor a thorough rinse with water, this was to ensure any trace of cleaning product was removed before sealing again the wet vacuum was used to remove the water from the floor and get the stone as dry as possible. The floor was then left to dry for 48 hours after cleaning.

Sealing a Yorkstone Tiled Floor

When I returned the the property two days later I promptly ran some damp tests all over floor and discovered a few minor issues. I solved these with heat gun and the floor was then ready for sealing.

To seal the Yorkstone tiles, I used Tile Doctor Seal & Go, which is topical water-based blend of acrylic polymers designed to provide durable surface protection and a low sheen finish. As a topical sealer (which sits as a protective barrier on the surface of the tiles) Seal & Go makes cleaning the floor much easier.

Yorkstone Slab Floor After Cleaning and Sealing in Hyde

I used four coats of the sealer, allowing for a 30 minute drying period between coats. As you can see from the photograph the result was truly fantastic! The customers were extremely pleased with the result and told me that they never knew there was such a lovely floor hiding underneath the muck. They also said that I saved them a lot of money and preserved the character of house because they now no longer feel compelled to replace the floor!

Deep Cleaning a Heavily Soiled Yorkstone Tiled Kitchen Floor in Greater Manchester

Heavily Soiled Yorkstone Tiled Floor Cleaned & Sealed in Hyde Read More »

Restoring Dull and Dirty Sandstone Floor Tiles in Hattersley

Restoring Dull and Dirty Sandstone Tiles in Hattersley

1 Comment / Denton Tile Cleaning, Sandstone Tile Cleaning, Work History / Kevin Parry

This property in Hattersley had just undergone major building works which had lasted for couple of years. During that time the Sandstone tiled living room floor had suffered greatly during the building works.

Sandstone Floor Before Cleaning in Hattersley

Additionally, the sealer previously used on the floor was a clear impregnating product which did nothing to bring out any natural colours in the Sandstone, leaving them dull and lifeless. The situation had been made worse but the building work mess, and the property owners were keen to get their local Tile Doctor in to resolve the problems.

Cleaning a Dull and Dirty Sandstone Tiled Floor

For the cleaning process, I used a strong dilution of Tile Doctor Pro Clean, which is our strong alkaline flexible cleaner meant for heavy duty cleaning and when used in more concentrated form for the stripping away of old sealers. I applied a strong dilution of Pro Clean across the floor and left it to dwell for about ten to fifteen minutes so it could work its magic on the layers of dirt and old sealer.

I followed this by getting on my knees and scrubbing the product into the stone with a stiff scrubbing brush. In this particular scenario, there wasn’t much that could be done with a rotary machine as the floor was very rough in texture and with a scrubbing brush it was much easier to reach the ingrained dirt.

After scrubbing, I removed all of the dirty cleaning solution with a wet vacuum, before rising the floor several times with clean water to get rid of all chemicals. With the cleaning process a success, it was time to leave the floor to dry for 48 hours before sealing.

Sandstone Floor During Cleaning in Hattersley

Sealing a Sandstone Tiled Floor

When I returned two days later to seal the tiles I started by using my damp tester to check for moisture that could affect the performance of sealer. Even the smallest quantity quantity of moisture can cloud the sealer and reduce its effectiveness.

Once satisfied that the floor was completely dry, I started sealing. I chose to use a topical Tile Doctor sealer called Seal & Go, which is a water based blend of acrylic polymers that is recommended for this type of stone providing stain resistance whilst enhancing the look of the tiles and providing an aesthetically pleasing low sheen finish.

I applied four coats of the sealer and the transformation was complete. I think the result speaks to itself, especially when you look at the before and after photos.

Sandstone Floor After Cleaning and Sealing in Hattersley

After completing the work, I left the very happy customers with a complimentary bottle of Tile Doctor Neutral Tile Cleaner to help them make sure future cleaning and maintenance is done correctly.

The customers were really pleased with the transformation in their floor and were good enough to leave the following feedback on the Tile Doctor website:

“Tony was very professional and did a great job on our Sandstone floor. We are really pleased with the results.”

Professional Sandstone Floor Restoration in Greater Manchester

Restoring Dull and Dirty Sandstone Tiles in Hattersley Read More »

Dirty Quarry Tiled Floor Transformed in Hale

1 Comment / Sale Tile Cleaning, Work History / Kevin Parry

We are very often contacted by customers to restore tiled floors they didn’t even know existed. Usually, the tiles will be hidden away underneath either carpet or, in some cases, linoleum. And, once the tiles are discovered, the likelihood is that the property owners want to have them restored to their original condition which is understandable as original features definitely add value to a property.

Here’s an example of this sort of work that I recently undertook at a property in the affluent suburb of Hale which is only ten miles from Manchester. The recently discovered floor in question was formed of very nice (but also very dirty) Quarry tiles. The customers had just bought the property and, having pulled up the carpets on the ground floor, were surprised with what they found.

They really wanted to get the floor restored in order to highlight the original character of the property, however, it was very heavily soiled and marked with glue deposits that proved very difficult for them to remove. As a result, they opted to search online for a solution – finding Tile Doctor in the process.

In the first instance, I visited the property to conduct a test clean and, with the customers pleased the result, we agreed dates for the full restoration to be carried out.

Cleaning a Dirty Quarry Tiled Floor

For cleaning the floor I started by using Tile Doctor Remove & Go, a product which is specially designed for removing coatings such as sealers, waxes and adhesives from tile – including the types of glue deposits left upon the removal of carpet. I left the product to dwell on the floor for 10 minutes before scrubbing it in to the tiles with a black scrubbing pad fitted to a rotary machine.

Next, I removed the now soiled cleaning solution with my wet vacuum and rinsed the floor several times with water to neutralise it, again followed by extracting the water after every rinse. Overall, the cleaning process was a success, but there were a few problem areas where the adhesive proved particularly difficult to remove.

To these areas I applied Tile Doctor NanoTech HBU Remover, which is a heavy build-up remover designed to work where other cleaners won’t. It utilises nano-sized particles to penetrate below tough stains and eliminate them. This was left to work its magic for about half an hour.

Following this, I steamed the tiles to soften the adhesive even further and then scrubbed the problem areas with hand held black scrubbing pads. This cleaning combination worked really well to clean the problem areas and all I had to do next was rinse them properly, before leaving the whole floor to dry.

Sealing a Quarry Tiled Floor

I returned to the property after allowing the floor to dry for three full days. Thankfully, I found that there were no damp issues to address, and so I could proceed with sealing without a problem.

The customers wanted to keep the floor as natural looking as possible, so I opted to use Tile Doctor Colour Grow, our impregnating sealer which soaks into the pores of the tile protecting it from within enhances the colours in the process and leaving a matte finish. I applied several coats before polishing off the excess using cotton cloths.

Looking at the before and after photos, I think you can agree that the floor is transformed! Certainly, my customers agreed – the newly restored Quarry floor will be a real asset to the property.

Dirty Quarry Tiled Floor Hidden Under Carpet Restored in Greater Manchester

Dirty Quarry Tiled Floor Transformed in Hale Read More »

Quarry tiled porch floor before and after cleaning in Middleton

Stained Quarry Tiled Porch Cleaned and Sealed in Middleton

1 Comment / Middleton Tile Cleaning, Quarry Tile Cleaning, Work History / TileProf

It’s not uncommon for us to hear from customers who have decoration work undertaken, only for the builders to leave plaster and paint stains all over the floor. These types of stains can be particularly difficult to remove from tiles – especially if you rely on using everyday, supermarket quality products.

Quarry tiled porch before cleaning Middleton

This was a problem for this customer from the town of Middleton, who had just had a new porch built and in the process the Quarry tiled floor had become very noticeably stained. Struggling to deal with the problem herself, the customer found Tile Doctor online and decided to make use of our expertise.

Cleaning Stained Quarry Tiles

To clean the porch tiles we used a strong dilution of Tile Doctor Pro Clean, our powerful alkaline product designed to remove dirt and stains on natural stone tiles and grout. We evenly applied Pro Clean and left it to dwell for five minutes, allowing it to seep into the tiles. We then agitated the product with a black scrubbing pad fitted to a rotary machine, breaking down the stubborn paint and plaster marks.

The resulting slurry was then removed using a wet vacuum, before the floor was rinsed thoroughly to remove any chemicals from the stone. With the tiles looking fresh and clean, we left them to dry completely overnight. We recommend a natural drying period of about 24 hours, although in some circumstances heat guns and turbo dryers can assist in speeding up the process.

Sealing Quarry Tiles

I returned to the property the next day, starting by using my damp tester to check whether the floor was dry enough to seal. There were some areas that were still damp, but I managed to get them dry quickly with my heat gun.

For sealing, I used four coats of Tile Doctor Seal & Go, our water-based blend of acrylic polymers that provides both a stain resistant surface seal and a durable low-sheen finish that compliments the natural stone. The addition of a fresh sealer will make the tiles far easier to keep clean in the future.

Quarry tiled porch after sealing Middleton

The customer was very pleased with the overall result. However, she was keen to make sure she could give the tiles the regular maintenance they need, so I left her with a complimentary bottle of Tile Doctor Neutral Tile Cleaner. This gentle, pH-neutral cleaner is perfect for regular maintenance as it reliably removes dirt and stains without damaging the sealer. You can use it to clean all types of tiles, stone and grout.

Cleaning and Sealing of a Stained Quarry Tiled Porch in Greater Manchester

Stained Quarry Tiled Porch Cleaned and Sealed in Middleton Read More »

Travertine floor before and after polishing in Didsbury

Burnishing the Polish Into Travertine Tiles in Didsbury

1 Comment / Stockport Tile Cleaning, Travertine Tile Cleaning, Work History / TileProf

While popular and highly coveted due to its natural brown colouring, Travertine is not as tough as other types of natural stone and thus needs regular maintenance if you wish to keep it looking good. Without it the polish can quickly dull, and can suffer from erosion over time if acidic cleaning products are used often resulting in small holes or pitting appearing.

This house in the Manchester suburb of Didsbury had a particularly large area of Travertine tiles which had proven to be very difficult for the property owner to maintain. When I spoke to her I explained that Tile Doctor have a reliable process for the restoration of Travertine and similar types of natural stone such as Marble and Limestone using a polishing process we have developed called burnishing, and I assured her that we could achieve the same with her floor.

Travertine tiled floor before polishing in Didsbury

Cleaning and Polishing Travertine Tiles

Tile Doctor’s burnishing system involves the application of four different diamond encrusted burnishing pads in sequence from coarse to fine, using a small amount of water with each pad for lubrication.

I started work on this Travertine by applying a Coarse 400 grit burnishing pad to strip away dirt and any old sealer remaining on the tiles, before removing any dirty water with a wet vac machine and rinsing the floor (a process which is repeated after the application of each pas). Next, I moved on to the Medium 800 grit pad, which I used to break down any ingrained dirt and stubborn marks, and to start smoothing down the rough and uneven surface that had developed on some of the tiles. I then used the Fine 1500 grit pad to smooth the surface even further and get the floor ready for its final polishing.

However, before applying the fourth and final pad, I took the time to carefully fill all the cracks and holes as these were spoiling the overall appearance of the tiles. Following this I left the floor for the day so it could dry off fully overnight.

Sealing Travertine Tiles

I returned to the property the next morning to seal the floor. My first course of action was to run a damp test; which we do in every situation as even a small amount of damp threatens to spoil the sealer. The test did reveal some damp spots, so I used my heat gun to dry them out quickly.

Once the floor was completely dry, I went over the floor with the Very Fine 300 grit pad, without any water as lubricant this time, to achieved the final desired polish. In this situation, I used Tile Doctor Colour Grow to seal the tiles as I knew it would enhance the natural shades in the Travertine. Colour Grow is a solvent based colour intensifying sealer that provides durable surface protection while allowing the surface to breath and enhance colour.

It’s really important that all excess sealer – that which doesn’t penetrate the stone – is polished off. For polishing off the excess, I used our three cloth system. After completing the sealing process, I went over the floor one final time with the Very Fine 3000 grit diamond burnishing pad to ensure a smooth and shiny finish.

Travertine tiled floor after polishing in Didsbury

Needless to say, the customer was very happy with result, remarking that the floor never looked that good before!

Professional Polishing and Sealing of a Dull Travertine Tiled Floor near Manchester

Burnishing the Polish Into Travertine Tiles in Didsbury Read More »

limestone floor before and after polishing in peel green

Dull Limestone Tiles Brought Back to Life with Burnishing in Peel Green

1 Comment / Eccles Tile Cleaning, Limestone Tile Cleaning and Polishing, Work History / Kevin Parry

This beautiful Limestone kitchen tiled floor at a property in Peel Green was only a year old and, while it wasn’t in too bad of a state, the customer told me the floor had not been sealed properly due to issues with retaining moisture. The lack of an adequate sealer had allowed the Limestone to become duller over time after exposure to dirt and muck. It also had some more obvious marks and stains in some place and needed some grouting to be done around the corners and edges of the room.

Limestone tiled floor before burnishing Peel Green

I travelled to the property in Peel Green, which is within the Greater City of Salford in Greater Manchester, to see what could be done to restore the condition of the tiles.

Burnishing Dull Limestone Kitchen Tiles

Upon closer inspection of the tiles, I recommended to the customer that we proceed with the process known as burnishing, which we use primarily on Limestone, Marble, and Travertine. Burnishing, which involves the application of diamond encrusted burnishing pads, breaks down old sealers, gets rid of marks, stains and ingrained dirt, and gradually builds and evens out the polish on the tiles.

I started burnishing the Limestone kitchen tiles straight away when I arrived at the property as it was a big area and would require lots of hard work to achieve the desired results within the space of a day.

Our burnishing system consists of four diamond encrusted pads: Coarse, Medium, a Fine and Very Fine. Each pad was applied to the Limestone in sequence in tandem with a small amount of water to act as lubrication, gradually smoothing and polishing the surface of the tiles. After every pad, I also used my wet vac machine to remove any dirty water left on the floor and, after the Fine pad I rinsed the floor thoroughly to remove any dirt left on floor. I then left it to dry.

Sealing Limestone Kitchen Tiles

When I was satisfied that the floor was completely dry, it was time to seal the Limestone tiles. However, I first went over the floor with Very Fine grit pad to provide a final polish before sealing.

My choice of sealer was the impregnating Tile Doctor Colour Grow, a product which enhances the natural colours in the stone whilst also offering robust protection against dirt and stains. Remembering that the tiles had never been properly sealed, I applied plenty of sealer and left it to dry for 10 minutes. Following this, I carefully removed any excess sealer left on the surface with a dry cotton cloth. After sealing I went over the floor once final time with the Very Fine pad, just to smoothen things down and leave an exceptionally neat finish.

When the job was finished, I gave the owner some tips and recommendations on the cleaning of the floor going forward and a complimentary bottle of neutral cleaner to get them started.

Limestone tiled floor after burnishing Peel Green

The customer was very pleased with the finish, so much so that she opted and take up the Tile Doctor Maintenance Plan to keep the floor looking good for years to come! This involves popping round every 6-12 months to top up the sealer and give the floor a quick polish.

Professional Maintenance of a Dull Limestone Tiled Floor in Greater Manchester

Dull Limestone Tiles Brought Back to Life with Burnishing in Peel Green Read More »

Encaustic Cement Tiles Burnished and Sealed in Stockport

1 Comment / Encaustic Cement Tile Cleaning, Manchester City Tile Cleaning, Work History / Kevin Parry

I’m often asked if you should seal a tile before grouting and the answer is a definite yes, and this Encaustic Cement tiled bathroom floor installation in Stockport is a great example as to why. The tiles had not been sealed before grouting and then, once the tiler went to grout the newly installed tiles with a grey grout, the colour ran into the tiles, staining them and leaving them looking grubby and dirty. Had the tiles been sealed it would of made the process of removing the grout from the surface of the tile much easier.

If you haven’t come across them before Encaustic cement tiles are often hand painted and are available in a range of beautifully artistic patterns, so it was a real shame that these tiles were allowed to be spoilt by an avoidable mistake. As you can imagine, the property owner was keen to have the tiles professionally restored, and she contacted me to get the job done. I took some photographs but I’m not sure that they do justice to the problem.

Encaustic Cement Floor Tiles Before Cleaning Stockport

Burnishing and Sealing Encaustic Cement Tiles

Rather than use a liquid cleaning product, I opted to use diamond encrusted handheld burnishing pads to remove the grout stains. Our burnishing system comprises four pads of varying grits. I started with the Coarse grit burnishing pads applying to the tiles it with a small amount of water as lubricant to grind down the grubby marks. Following this I worked my way through the system, applying Medium, Fine and Very Fine pads to gradually restore the appearance of the floor. Once the burnishing process has been completed I rinsed the tiles and then accelerated the drying process using a heat gun to prepare them to be sealed.

Sealing Encaustic Cement Tiles

Removing any excess moisture before sealing is essential as even a small amount can cloud the sealer and prevent it from properly protecting the tiles from dirt and stains. Once satisfied that the floor was dry, I proceeded to seal it using Tile Doctor Colour Grow. As an impregnating sealer Colour Grow penetrates deep into the pores of the stone to fill them and thus prevent dirt from becoming ingrained. Colour Grow’s colour intensifying properties also really accentuated the patterns of the Encaustic Cement tiles.

Now that these fantastic tiles have been properly sealed it will be far easier for the customer to keep them clean in future. Needless to say, she was very happy with the result. We recommend topping up your sealer on a regular basis to ensure problems like those which occurred here do not damage the appearance of your tiles.

Professional Tile Burnishing, Cleaning and Sealing for an Encaustic Cement Tiles Bathroom Floor Restoration in Stockport

Encaustic Cement Tiles Burnished and Sealed in Stockport Read More »

Dishevelled Chinese Rough Slate After Restoration Cheadle

Rough Chinese Slate Kitchen Floor Revitalised in Cheadle

1 Comment / Slate Tile Cleaning, Stockport Tile Cleaning, Work History / Kevin Parry

This small rough Chinese Slate floor in the kitchen of a house in the village of Cheadle near Stockport in Greater Manchester had not had any sealer put on it for many years and was very grubby (dishevelled as described by the customer) looking even after the customer had tried to clean it.

Sealers do take a lot of punishment, especially in a high traffic area such as a small kitchen and will wear off over time and once this happens the floor will start to lose its appearance as dirt becomes ingrained in the stone and it can no longer be cleaned effectively.

Dishevelled Chinese Rough Slate Before Restoration Cheadle

Cleaning the Slate Tiled Floors

As we have to apply a liberal amount of water with this sort of work, the first step was to remove the Kicker boards at the bottom of the Kitchen units and silicone the Kitchen units that were fixed; this stops water seeping in and blowing the MDF allowing us to concentrate on cleaning the Slate without causing any damage.

I started the cleaning process by applying a strong dilution of Tile Doctor Pro-Clean to get rid of the built up dirt and any remaining sealer, leaving it to soak into the Slate before scrubbing the floor with a black scrub pad fitted to buffing machine running at slow speed. Tile Doctor Pro-Clean is a strong alkaline cleaner/stripper that is safe to use on natural stone, we do have stronger products available if required but in this case a strong dilution of Pro-Clean was sufficient to tackle any remaining sealer.

This process gave the Slate and grout lines a good deep clean and after rinsing the floor with water which was then extracted using a wet vacuum I repeated the process on stubborn areas until satisfied the floor was as clean and free of old sealer. Last stage of the cleaning process was to give the floor a final rinse and then get it as dry as possible using the wet vacuum to soak up the moisture.

Sealing Riven Slate Tiles

The floor was quite small so I was able to leave the floor to dry off over lunch time and then on my return managed to get it fully dry with a little heat from a heat gun. The customer wanted a mat finish so once dry I applied Tile Doctor Colour Grow sealer which impregnates into the pores of the natural stone protecting it from within and enhancing the natural colours of the Slate at the same time.

For general cleaning of Sealed stone floors, we recommend the use of a PH Neutral Cleaner as anything with a strong PH will degrade the life of the sealer over time.

Cleaning and Sealing a Chinese Slate Tiled Floor in Greater Manchester

Rough Chinese Slate Kitchen Floor Revitalised in Cheadle Read More »