Victorian Tiled Hallway Renovated in Ashton Under Lyne

This Victorian Tiled Entrance Hall was an original feature of a house in Ashton under Lyne which is a town in the wider Greater Manchester area; naturally an entrance hall is a high traffic area and subject to a fair amount of wear so it was in need of a deep clean and re-seal.

Victorian-Floor-Before-Cleaning

Cleaning the Victorian Tiled Floor

The Victorian Tiled tiles were fairly dirty so we mixed Tile Doctor Pro-Clean 50/50 with NanoTech Ultra-Clean and then diluted it with water; the two products together form a very powerful cleaner as you get the cleaning power of Pro-Clean combined with the tiny abrasive particles found in Ultra-Clean. The resulting mixture was worked into the floor using a buffing machine fitted with a black scrubbing pad. Once the floor was clean and I was happy with the results it was rinsed with clean water to remove any trace of cleaner and neutralise the floor prior to sealing. We used a wet vacuum to remove the water from the floor and left the floor to dry overnight.

Sealing Victorian Floor Tiles

The next day the floor was dry so we set about applying the sealer. For Victorian Tiled floors I recommend the use of Tile Doctor Seal and Go, its ideal for Victorian Tiled and as well as providing good stain protection its adds a nice low sheen to the floor. To fully seal this floor we needed four coats of Seal and Go before which does take time as it’s necessary to allow each coat to dry before applying the next.

Victorian-Floor-After-Cleaning-and-Sealing

 
 

Cleaning and Sealing Victorian Tiled Floor Tiles in Greater Manchester