This Victorian Tiled Entrance Hall was an original feature of a house in Ashton under Lyne which is a town in the wider Greater Manchester area; naturally an entrance hall is a high traffic area and subject to a fair amount of wear so it was in need of a deep clean and re-seal.
Cleaning the Victorian Tiled Floor
The Victorian Tiled tiles were fairly dirty so we mixed Tile Doctor Pro-Clean 50/50 with NanoTech Ultra-Clean and then diluted it with water; the two products together form a very powerful cleaner as you get the cleaning power of Pro-Clean combined with the tiny abrasive particles found in Ultra-Clean. The resulting mixture was worked into the floor using a buffing machine fitted with a black scrubbing pad. Once the floor was clean and I was happy with the results it was rinsed with clean water to remove any trace of cleaner and neutralise the floor prior to sealing. We used a wet vacuum to remove the water from the floor and left the floor to dry overnight.
Sealing Victorian Floor Tiles
The next day the floor was dry so we set about applying the sealer. For Victorian Tiled floors I recommend the use of Tile Doctor Seal and Go, its ideal for Victorian Tiled and as well as providing good stain protection its adds a nice low sheen to the floor. To fully seal this floor we needed four coats of Seal and Go before which does take time as it’s necessary to allow each coat to dry before applying the next.
Cleaning and Sealing Victorian Tiled Floor Tiles in Greater Manchester
Details below of a Victoria floor tile renovation we did recently in the hallway of a house in Heaton Mersey, which is an old suburb of Stockport. The floor was an original feature in the house being laid sometime in the eighteen hundreds, some sealer was left on the floor to offer protection but most had been worn down and the floor was suffering from the impact of ground in dirt from recent building works.
Cleaning the Victorian Floor
The floor was cleaned using Tile Doctor Pro-Clean and a black buffing pad to loosen the soil that had built up on the floor. The floor was then neutralised to remove any remaining cleaning solution by rinsing it three times with water and then left to dry.
Sealing the Victorian Floor
Once dry the floor was sealed with 5 coats of Tile Doctor Seal and Go which is ideal for sealing Victorian tiled floors as it brings out the colours in the tile whilst providing stain protection and allowing moisture vapour to breathe through.
The owner Mr Mitchell was very pleased with my work and left a great testimonial which is copied below.
“Steve has done an excellent job of cleaning up a very dirty old Victorian floor. The job was not without its problems, but Steve dealt with them very professionally, taking responsibility for issues with third parties that he had little control over. He has also done an excellent job of cleaning our carpets.”
Cleaning and Sealing a Victorian floor in Heaton Mersey, Stockport