Problems with Travertine in Shower

As you can see from these photographs we don’t just clean and seal stone floors we can also rectify problems with wall tiles as well. In this case our customer had a problem with Travertine installed in a shower at a house in Stockport which had not been sealed following installation. Travertine is porous and over time the tiles had becomes stained with the dyes and soap scum, mould had also managed to get a grip in the pores of the travertine.

Travertine-shower-tile-before

How to Clean a Travertine Shower

To get the Travertine back to its original condition it was necessary to use a dilution of Tile Doctor Pro-Clean with a set of six inch Burnishing pads, each one serves a different function from scrubbing to polishing, the buffing pads are applied with water and restore the shine on the surface of the tile. The Tile Doctor Pro-Clean also came in handy to clean the Grout, its best applied with a spay attachment so it can mix with air allowing it to dwell on the tile before being scrubbed with a stiff brush and washed down. The whole Travertine Shower tile was washed down with water and left to dry before sealing. Last step was to remove and replace the silicone seal at the bottom of the tray using mildew-resistant Mapei Mapeisil Silcone in Jasmine in order to match the grout.

How to seal Travertine Shower

Once the shower was dry we sealed the Travertine using two coats of Tile Doctor Colour Grow which brings out the natural colours in the stone as well as providing surface protection. The sealer will wear off over time so it will be necessary to reapply it from time to time however it will prevent the problems from re-occurring. The transformation was quite remarkable and the customer was extremely happy with the results.

Travertine-shower-tile-after

 
 

Cleaning Travertine Shower Tile in Stockport